TSB – FLASH: Oil Change Monitor Alerts Prematurely
NUMBER: 08-013-08 REV. A GROUP: Vehicle Performance DATE: July 11, 2008 SUBJECT: FLASH: Oil Change Monitor Alerts Prematurely MODEL: 2007 – 2008 (JK) Wrangler NOTE: […]
NUMBER: 08-013-08 REV. A GROUP: Vehicle Performance DATE: July 11, 2008 SUBJECT: FLASH: Oil Change Monitor Alerts Prematurely MODEL: 2007 – 2008 (JK) Wrangler NOTE: […]
NUMBER: 08-013-08 GROUP: Vehicle Performance DATE: April 03, 2008 SUBJECT: FLASH: Oil Change Monitor Alerts Prematurely OVERVIEW: This bulletin involves selectively erasing and reprogramming the […]
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Steering Angle Sensor (SAS) with new software.
SUBJECT:
The software programmed into the Anti-Lock Brake System (ABS) control module
on about 50,600 of the above vehicles may cause the rear brakes to lock up during
certain braking conditions. This could result in a loss of vehicle control and cause
a crash without warning.
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the radio with new software. If
the vehicle is a Wrangler equipped with a 3.8L engine (sales code EGT) built prior to
November 10, 2006 (MDH 1110XX) ensure service bulletin 18-36-06 has been/is
performed.
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control
Module (PCM) with new software.
OVERVIEW:
This Bulletin provides guidelines to minimize flash reprogramming problems and recovery
procedure information for failed flash attempts.
DISCUSSION:
The following procedure explains how to create a Vehicle Scan Report. This report
provides you, the technician, a valuable tool in diagnosis, repair, and repair verification of
today’s vehicles. By incorporating this into the DaimlerChrysler’s 6-Step Troubleshooting
process, the results will be repairs that take less time and increase your Fixed-First-Visit
scores.
Copyright © 2024 | WordPress Theme by MH Themes