Archive for January, 2008

Full Traction Suspension
NEW Jeep JK Wrangler 4″ & 6″ Lift Systems

January 30th, 2008

I just got word that Full Traction Suspension will finally be releasing their long awaited Jeep JK Wrangler 4" Premium Lift System and 4" Ultimate Lift System as well as the seriously badass long arm suspension system we all saw on the Off Road Evolution JK at SEMA 2007. Below are the official press releases for all three products:

Hypertech Jeep JK Wrangler
MAX Energy Power Programmer

January 30th, 2008

If there's one thing I've been hearing a lot of Jeep JK Wrangler owners wanting, it would have to be a programmer that would allow them to optimize the performance of their 3.8L V6 engine and if at all possible, a way to calibrate their speedometer/odometer to match a set of bigger tires that they've just installed as well. And, thanks to Hypertech, we now have that and more with the release of their MAX Energy Power Programmer specifically made for the Jeep JK Wrangler.

Old Man Emu Jeep JK Wrangler
2" Lift Installation Write-Up

January 25th, 2008

If you're looking to give your Jeep JK Wrangler a 2" lift and have no plans of ever going taller in the future, there's only one true suspension lift kit you should consider and that is the one made by Old Man Emu. Being that the tallest lift that they make is a 2" lift, you can be sure that they do all that they can to make it the very best and have actually made a reputation for themselves for doing just that.

LoD Jeep JK Wrangler Front Bumper Winch Hoop

January 24th, 2008

For those of you who have been waiting patiently for LoD to release their new Jeep JK Wrangler Front Bumper Winch Hoop, I am happy to report that it’s finally here and available for purchase. Available for only $59 + $19 for shipping and handling, this bumper winch hoop is very easy to install and only requires minor drilling in order to bolt it onto your bumper. Due to high demand, please expect a 1-2 weeks to have this hoop delivered to your door.

TSB - Electronic Stability Control Disable Feature For Modified 4WD Vehicles

January 18th, 2008

Shrockworks Jeep JK Wrangler
Mid-Width Front Bumper Installation Write-Up

January 16th, 2008

Just like the very popular Shrockworks Stubby Front Bumper, the new Mid-Width Front Bumper is laser cut and CNC formed out of 3/16" steel plate, comes complete with a winch plate that can accept most 9500 lbs. winches including the new WARN PowerPlant, a skid plate which will effectively protect the Rubicon electronic disconnect, (2) D-Ring mounts, (2) off-road light mounts, a winch hoop and it will allow you to keep your factory fog lights.

The installation of the Shrockworks Jeep JK Wrangler Mid-Width Front Bumper is just as simple to install as the Stubby and can be done by yourself. If you can employ the help of a friend, you should be able to complete the installation in about an hour or two at most by following the write-up below.

Jeep JK Wrangler Steer Stop Adjustment

January 15th, 2008

If you just installed a set of bigger tires on your stock wheels or wheels that have too much back spacing, you are most likely experiencing some tire rub on your front sway bar, frame rail and/or lower control arms. Now, the obvious fix for this would be to install a set of wheels that have less back spacing or to install a set of 1.5" wheel spacers but if you're rubbing is very minor, you might want to consider adjusting out your Jeep JK Wrangler's steer stops. Although this will cause you to loose some of your turning radius, it is a very cheap and easy fix that can be done in minutes and with nothing more than a couple washers and a wrench.

TSB - Wind-Like Sound At Outer Ends Of The Sunrider Soft Top Windshield Header

January 15th, 2008

Superior Axle NO-HASSLE Warranty!!

January 12th, 2008

Without a doubt, Superior Axle & Gear manufacturers some of the strongest axles you can buy for your Jeep JK Wrangler and to prove it, they will now be offering their Discovery Series Axle Shafts with a 5-Year NO-HASSLE Warranty and their all American made Evolution Series Axle Shafts with a LIFETIME NO-HASSLE Warranty!!

SOLID Jeep JK Wrangler Front SpynTec Conversion Kit

January 11th, 2008

Just as was promised back in November at the 2007 SEMA Show, SOLID Axle Industries has just released their all new SpynTec Conversion Kit and it is now available for sale. The official press release for this awesome new front hub conversion can be seen below and after having the opportunity to check it out for myself, I can tell you that this is going to be a must have upgrade for JK owner I know

TeraFlex Sway Bar Link Quick Disconnects Installation

January 11th, 2008

One of the easiest and single best things you can do to improve the performance of your Jeep JK Wrangler on the trail is to disconnect your front sway bar links. By doing this, you free up your front axle to have a significantly greater range of articulation or what Jeepers often refer to as 'flex'. And, when you can maintain all four on the floor, you inherently gain more stability and traction, both of which will improve your Jeep's ability on technical terrain.

— Next Page »